60 Inch Three Row Pickup Truck Light Bar with 432 LEDs and 12V Built-in Decoding

This 60-inch pickup truck light bar is a three-row rear lighting unit that combines brake, turn signal, reverse and running light functions in a single housing. It uses 432 LEDs split evenly across red, yellow and white outputs, giving pickup owners a way to add or replace tailgate lighting with one bar rather than several separate lamps. The unit runs on 12V DC and draws 2 A, with a stated working range of DC12-16V and 3 A current during operation. Built-in decoding supports existing vehicles including Ford, Dodge, Chevrolet and JMC, so it can be fitted to a range of pickups without an external decoder. The housing is made from FPCB and measures 150 x 22 x 8 mm, with a packing size of 18 x 18 x 2.5 cm and a weight of 216 g. Available models are 1.2 m, 1.5 m and three rows.

Features and Construction

The light bar uses 2835 Sanan LEDs arranged in three rows, with 144 red, 144 yellow and 144 white beads for a total of 432 lights. The FPCB housing carries the circuitry and the colour-coded wiring that links the bar to the vehicle's 12V system. The stated luminous flux is 1800, the brightness figure is 1200, the colour rendering index is at least 80 and the illumination angle is 180 degrees. The service life is given as 30,000 hours, and the unit is described as cold resistant to minus 35 degrees.

Material and Build

The main material is FPCB, a flexible printed circuit board that holds the LED beads and wiring in a flat housing. This construction suits a rear light bar because it keeps the profile slim at 8 mm while still carrying three rows of LEDs. The 2835 Sanan beads are the stated light source, and the unit is built with colour-coded wiring for red positive, brown shared negative, green left turn, yellow right turn, white brake and grey ground. The packing size is 18 x 18 x 2.5 cm and the weight is 216 g.

Size and Practical Fit

The bar is 60 inches long, which is the stated length for the unit shown in the source data. The housing measures 150 x 22 x 8 mm. It is available in three model options: 1.2 m, 1.5 m and three rows, so buyers should confirm which length matches their pickup before ordering. The 180-degree illumination angle gives wide coverage across the rear of the vehicle, and the slim 8 mm profile helps it sit along the tailgate area without a bulky housing.

Uses and Placement

This light bar is intended for pickup trucks and fits existing models including Ford, Dodge, Chevrolet and JMC through its built-in decoding. It combines several rear lighting functions, so it can be used as a tailgate bar for road use or as an additional light source when working around a vehicle in low light. The wiring layout allows separate control of left turn, right turn, brake, running light and double flash functions.

Event or Professional Use

The three-colour output covers red, yellow and white, which between them support running light, turn signal, brake and reverse functions. The double flashing light function is wired as 2+3, and the out yellow wire runs as 4+5 for the running light. For professional or event use where a pickup is stationary, the 180-degree angle and 1200 brightness figure provide a broad spread of light. The stated cold resistance to minus 35 degrees supports use in cold conditions.

Everyday Home Use

For everyday driving, the bar provides brake, turn signal and running light functions in one unit. The red wire connects to 12V positive and the brown wire to the shared negative; if the brown wire is not connected to the car, the bar can still work with the positive electrode and the 1.2.3 foot connections. The green wire handles left turn and brake, the yellow wire handles right turn and brake, the white wire is the brake lamp and the grey wire is ground. Double flashing is wired as 2+3.

Benefits and Buying Value

A single 60-inch bar carries 432 LEDs and four lighting functions, which reduces the number of separate lamps needed along the rear of a pickup. The built-in decoding covers several named vehicle makes, and the colour-coded wiring keeps installation points clear. The stated 30,000-hour service life and FPCB construction are the main durability figures provided, with no other longevity claims made in the source data.

Reuse and Low Maintenance

The LED beads are rated for a stated 30,000 hours of service life, and the FPCB housing is a sealed flat assembly rather than a set of separate bulb holders. There are no replaceable bulb specifications in the source data, so maintenance is limited to checking the wiring connections and keeping the lens clean. The cold resistance to minus 35 degrees is the only temperature figure given, and no other environmental ratings are stated.

Why Choose This Product

This light bar suits buyers who want red, yellow and white rear lighting in one 60-inch unit with 432 LEDs and built-in decoding for Ford, Dodge, Chevrolet and JMC. It runs on 12V DC at 2 A, measures 150 x 22 x 8 mm and weighs 216 g, with a luminous flux of 1800 and a 180-degree illumination angle. The three model options (1.2 m, 1.5 m and three rows) let buyers match the bar to their pickup. No price, certification or warranty details are provided in the source data.