Indoor Induction Wall Lamp with Double Head, 220V, and 3000K/4000K/6000K Options

This indoor induction wall lamp is designed for wall-mounted lighting where automatic switching and a clean modern look are useful. The listing covers single head and double head formats, 220V operation, and a range of light colours including 3000K warm light, 4000K neutral light, and 6000K white light. Sensor versions are available in those same colour temperatures, which makes the lamp suitable for hotel corridors, porches, balcony walls, and domestic exterior positions where light is needed only when someone is present. Power choices run from 7W and 10W through to 14W, 15W, and 20W, so the same fitting family can be used across different areas without changing the overall style. The full body measures 300 x 50mm, the single head is 27 x 5 x 10cm, and the double head is 30 x 5 x 10cm. The product title also describes it as outdoor waterproof, but no IP rating is supplied in the source text, so that should be checked before exposed installation.

Features and Construction

The practical focus here is choice: one lamp format, multiple light colours, multiple wattages, and a sensor option. That makes it easier to specify the same wall light across a hotel, rental property, or home without ordering several unrelated products. The details below set out what the source text confirms.

Material and Build

The source listing does not name the housing or diffuser material. It refers to a shell price option, which indicates that a shell-only variant is available alongside complete configurations, but it does not state what that shell is made from. As a result, no claim can be made about corrosion resistance, impact strength, or long-term outdoor performance beyond the outdoor waterproof description in the title. If material specification matters for your project, confirm it with the supplier before ordering. What is clear is the modern style and the induction wall lamp format.

Size and Practical Fit

Two physical formats are listed. The single head measures 27 x 5 x 10cm, and the double head measures 30 x 5 x 10cm. The full body size is given as 300 x 50mm, which is the same as 30 x 5cm and aligns with the double head width. This means the single head is slightly narrower, while the double head offers two light points across a 30cm width. Both are compact wall fittings rather than large fixtures, so they suit areas where a low-profile wall light is preferred. The 220V voltage is stated, and installation should be handled by a competent person.

Uses and Placement

Wall lights of this type are usually chosen for circulation areas, entrances, and outdoor walls close to a door. The induction sensor option is the key practical feature because it allows the lamp to switch on automatically rather than relying on a separate switch. The listed colour temperatures also allow the same fitting to be used in different zones.

Event or Professional Use

For hotels, guesthouses, and serviced apartments, the double head version in 3000K warm light or 4000K neutral light can be used along corridors, stairwells, and entrance walls. The sensor version in 6000K white light may suit back-of-house areas or service corridors where cooler light is preferred. Because the lamp is listed with a modern style and a compact 30 x 5 x 10cm double head, it can be repeated along a wall without dominating the interior. The 10W, 14W, and 20W double head options give a choice of output levels for different corridor lengths and ceiling heights.

Everyday Home Use

At home, the single head 7W, 10W, or 15W version can be used on a porch, balcony, or side return. The sensor 3000K warm light option is likely to suit entrances where a softer colour is wanted, while the sensor 6000K white light gives a cooler appearance. The double head 10W, 14W, or 20W versions can light a wider area above a door or along a garden wall. The outdoor waterproof description suggests exterior use is intended, but because no IP rating is given, avoid directing water jets at the fitting and confirm suitability for exposed positions before installation.

Benefits and Buying Value

The value of this lamp lies in configuration rather than extra accessories. One product family covers single and double heads, three colour temperatures, sensor and non-sensor versions, and five wattages. That reduces the need to source different wall lights for different parts of a building. The induction function can also reduce unnecessary lighting time in areas that are not constantly occupied.

Reuse and Low Maintenance

No maintenance schedule or lifespan figure is provided in the source text, so no claim can be made about service intervals or expected life. The practical low-maintenance point is that the lamp has no listed moving parts and no replaceable filters or covers mentioned. Where a sensor version is used, the automatic switching may reduce the time the light is left on compared with a manually switched fitting in the same position, but this depends on settings and usage. Cleaning should be limited to gentle, non-abrasive methods suitable for the final housing material.

Why Choose This Product

Choose this indoor induction wall lamp if you need a wall-mounted light with a modern profile, 220V operation, and a choice of 3000K, 4000K, or 6000K light. The single head at 27 x 5 x 10cm and double head at 30 x 5 x 10cm allow the same style to be used in narrow and wider positions. The sensor option adds automatic switching for hotels and homes, and the 7W to 20W range allows output to be matched to the space. The shell price option is useful for trade buyers who already have their own light source, but the source text does not confirm what the shell includes beyond the shell itself. Always confirm IP rating and material if the lamp is going into an exposed outdoor location.