1506 Stainless Steel Welding Exhaust Modification Drum for Car and Motorcycle

This 1506 stainless steel modification drum is a metal exhaust component intended for car or motorcycle modification work where a welded connection is required. It is supplied as a single tailpipe section with a 5.5 cm connection calibre and a total length of 36.5 cm. The single tailpipe net weight is 1025 g, and the listed finish is silver. These figures are the key practical details for anyone planning an exhaust repair or layout change, because they allow you to check pipe matching, available space, and support needs before committing to the work. This compact description covers the stated material, the welding connection method, the measurable size data, and sensible points to consider when fitting.

Features and Construction

The product information for this item is short and specific. It identifies the model as 1506, the connection method as welding modification drum, and the material as stainless steel. The tailpipe connection calibre is 5.5 cm, the tailpipe total length is 36.5 cm, and the single tailpipe net weight is 1025 g. The option shown is silver. Those details are the basis for the sections below, with no added claims about performance, fitment across specific vehicles, or long-term behaviour.

Material and Build

The drum is made from stainless steel. In an exhaust context, that is the material detail given in the source information, and it is the only material stated here. The connection method is welding, which means the drum is intended to be joined to compatible pipework rather than clamped or bolted on. The model number is 1506, which helps distinguish this part from other modification drums when ordering or comparing listings. No wall thickness, grade of stainless steel, or surface treatment beyond the silver finish is provided, so those points should not be assumed.

Size and Practical Fit

The tailpipe connection calibre is 5.5 cm, and the tailpipe total length is 36.5 cm. These two measurements are the main sizing references for checking whether the drum can sit in the intended position and mate with the existing exhaust section. The single tailpipe net weight is 1025 g. That weight is worth noting when planning how the finished exhaust run will be supported, especially if the drum is being added to an existing system. No other lengths, diameters, or angles are stated, so any further dimensions would need to be confirmed from the actual part or supplier.

Uses and Placement

Because the source describes this as a car and motorcycle modification drum, the likely context is exhaust work rather than general fabrication. The welding connection method points to a permanent join, so it is best suited to situations where the exhaust layout is being altered, repaired, or built up in a workshop setting. The simple list of measurements means the buyer should treat fitment as a check-first task, using the 5.5 cm connection calibre and 36.5 cm total length as the primary reference points.

Event or Professional Use

In a workshop or professional exhaust fabrication context, a welding modification drum can be used when a section needs to be added or replaced and a welded joint is acceptable. The 1506 model is identified by number, which can help when ordering the same part again. The 5.5 cm connection calibre and 36.5 cm total length give the fabricator the basic figures needed to plan the cut and joint. The 1025 g single tailpipe net weight should also be factored into any support or mounting arrangement. No professional certification, pressure rating, or fitment list is provided in the source text.

Everyday Home Use

For a home mechanic working on a car or motorcycle exhaust, this drum offers a straightforward part with clear stated measurements. The welding connection method means the job requires welding equipment and the relevant skill, so it is not a simple clamp-on replacement. The silver finish and stainless steel material are the stated appearance and material details. Before starting, compare the 5.5 cm connection calibre with the pipe you intend to join, and check that the 36.5 cm overall length fits the available space. The 1025 g weight is the figure to use when judging whether extra support is needed.

Benefits and Buying Value

The practical value of this item comes from its stated dimensions, material, and connection method rather than from marketing claims. It is a single stainless steel modification drum with a 5.5 cm connection calibre, a 36.5 cm total length, and a 1025 g net weight. Because the source gives these figures, a buyer can make a more informed decision about whether the part matches their exhaust project. The sections below keep to those facts and avoid promising outcomes that the source does not support.

Reuse and Low Maintenance

Stainless steel is the material named for this drum, and it is the only material detail supplied. That is the extent of the material information available here, so no specific cleaning regime or lifespan should be assumed. The welding connection creates a fixed joint, which means later removal would require cutting and re-welding rather than unclamping. The silver finish is the stated appearance. Keep the part dry and clean before fitting, and handle it with care before installation to avoid unnecessary surface marks.

Why Choose This Product

Choose this 1506 modification drum if you need a stainless steel exhaust section with a 5.5 cm connection calibre and a 36.5 cm total length, and if a welded connection suits your project. The 1025 g single tailpipe net weight is a useful figure for planning support. The silver finish is the stated colour option. The package contains one car motorcycle modification drum. No additional fittings, clamps, or instructions are listed, and no price, saving, or comparison with other brands is provided. Confirm all measurements against your own exhaust before ordering.